Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 43

8. In the Protocol Selection tab, use the Protocol Selected drop-down menu next to
QUAD_224 to select Custom 1/12.5 Gb/s
X-Ref Target - Figure 2-6
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
Figure 2-6: Customize IP – Protocol Selection
www.xilinx.com
Chapter 2: Creating the IBERT Cores
(Figure 2-6).
X15540-121416
43
Send Feedback