Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 34

9. Alternatively, to view the GTY transceiver operation, click Layout > Serial I/O Analyzer.
From the top of the Hardware Manager window, select Auto-Detect Links to display all
available links automatically. Links can also be created manually in the Links window by
right-clicking and selecting Create Links, or by clicking the Create Links button
(Figure 1-27).
X-Ref Target - Figure 1-27
10. If links are created manually, the Create Links window is displayed. The options in this
window are used to link any TX GT to any RX GT. To create links, select the TX GT and RX
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
Chapter 1: VCU1287 IBERT Getting Started Guide
Figure 1-27: Serial I/O Analyzer - Create Links
www.xilinx.com
X15563-121416
34
Send Feedback