Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 33

6. In the Select Hardware Target window, the xilinx_tcf cable appears under Hardware
Targets, and the JTAG chain contents of the selected cable appear under Hardware
Devices (Figure
Frequency at the default value (15 MHz), click Next.
X-Ref Target - Figure 1-25
7. In the Open Hardware Target Summary window, click Finish. The wizard closes and the
Vivado Design Suite opens the hardware target.
8. A dialog to auto-detect the I/O links for the IBERT core will be displayed if the Vivado
Design Suite default warnings and notification have not been changed. Press Yes to
automatically detect the links
X-Ref Target - Figure 1-26
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
1-25). Select the xilinx_tcf_Digilent target and keep the JTAG Clock
Figure 1-25: Select Hardware Target
(Figure 1-26).
Figure 1-26: Auto-detect the Serial I/O Links
www.xilinx.com
Chapter 1: VCU1287 IBERT Getting Started Guide
X15556-121416
X15555-121416
33
Send Feedback