Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 32

3. In the Hardware Manager window
X-Ref Target - Figure 1-24
4. An Open Hardware Target wizard opens. Click Next in the first window.
5. In the Hardware Server Settings window, select Local server (target is on local machine).
Click Next.
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
(Figure
Figure 1-24: Open a New Hardware Manager
www.xilinx.com
Chapter 1: VCU1287 IBERT Getting Started Guide
1-24), click Open New Target.
X15554-121416
32
Send Feedback