Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 23

10. If links are created manually, the Create Links window is displayed. The options in this
window are used to link any TX GT to any RX GT. To create links, select the TX GT and RX
GT from the two lists, then click the Add (+) button. For this project, connect the
following links
MGT_X0Y0/TX (xcvu095_0/Quad_224) to MGT_X0Y0/RX (xcvu095_0/Quad_224)
°
MGT_X0Y1/TX (xcvu095_0/Quad_224) to MGT_X0Y1/RX (xcvu095_0/Quad_224)
°
MGT_X0Y2/TX (xcvu095_0/Quad_224) to MGT_X0Y2/RX (xcvu095_0/Quad_224)
°
MGT_X0Y3/TX (xcvu095_0/Quad_224) to MGT_X0Y3/RX (xcvu095_0/Quad_224)
°
X-Ref Target - Figure 1-19
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
(Figure 1-19):
Figure 1-19: Create Links Window
www.xilinx.com
Chapter 1: VCU1287 IBERT Getting Started Guide
X15558-121416
23
Send Feedback