Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 42

7. A Customize IP window opens. In the Protocol Definition tab, set the LineRate(Gbps)
to 12.5. Change Refclk(MHz) to 125. Keep defaults for other fields
X-Ref Target - Figure 2-5
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
Figure 2-5: Customize IP – Protocol Definition
www.xilinx.com
Chapter 2: Creating the IBERT Cores
(Figure 2-5).
Send Feedback
X15570-121416
42