Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 39

2. In the Vivado Design Suite window, click Manage IP (highlighted in
select New IP Location.
3. A Create a New Customized IP Location dialog window opens (not shown), Click Next.
4. In the Manage IP Settings window, select a part by clicking the (...) button next to the
Part field. A Select Device window displays. Use the drop-down menu items to narrow
the choices. Select the xcvu095-ffvb2104-3-e device (see
X-Ref Target - Figure 2-2
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
Figure 2-2: Select Device
www.xilinx.com
Chapter 2: Creating the IBERT Cores
Figure 2-1) and
Figure 2-2). Click OK.
X15567-121416
Send Feedback
39