Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 15

5. From the main System Controller menu, select option (1) to access the SuperClock-2
options:
VCU1287 System Controller v1.0
- Main Menu -
-----------------------------
1. Set Programmable Clocks
2. Get Power System (PMBUS) Voltages
3. Get Power Monitoring Data (INA226)
4. Adjust FPGA Mezzanine Card (FMC) Settings
5. Get GPIO Data
6. Get EEPROM Data
7. Configure UltraScale FPGA
Select an option
6. Use the Programmable Clocks menu option (2) to set the output clock frequencies of
the Si5368 clocks to 125 MHz.
VCU1287 System Controller v1.0
- Clock Menu -
-----------------------------
1. Set VCU1287 Si570 Frequency
2. Set VCU1287 Si5368 Frequency
3. Save VCU1287 Clock Frequency to EEPROM
4. Restore VCU1287 Clock Frequency from EEPROM
5. View VCU1287 Saved Clocks in EEPROM
6. Set VCU1287 Clock Restore Options
7. Read VCU1287 Si570 Frequency
8. Read VCU1287 Si5368 Frequency
0. Return to Main Menu
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
Chapter 1: VCU1287 IBERT Getting Started Guide
www.xilinx.com
15
Send Feedback