Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 49

14. When the synthesis is done, a Synthesis Completed window opens. Select Run
Implementation and click OK
X-Ref Target - Figure 2-12
15. When the implementation is done, an Implementation Completed window opens. Select
Generate Bitstream and click OK
X-Ref Target - Figure 2-13
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
(Figure 2-12).
Figure 2-12: Synthesis Completed
(Figure 2-13).
Figure 2-13: Implementation Completed
www.xilinx.com
Chapter 2: Creating the IBERT Cores
X15576-121416
X15577-121416
Send Feedback
49