Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 53

7. A Customize IP window opens. In the Protocol Definition tab, set the LineRate(Gb/s) to
28.00. Change Refclk(MHz) to 125. Keep defaults for the other fields
X-Ref Target - Figure 2-16
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
Figure 2-16: Customize IP– Protocol Definition
www.xilinx.com
Chapter 2: Creating the IBERT Cores
(Figure
Send Feedback
2-16).
X15580-121416
53