Xilinx Virtex UltraScale FPGA VCU1287 Getting Started Manual page 21

6. In the Select Hardware Target window, the xilinx_tcf cable appears under Hardware
Targets, and the JTAG chain contents of the selected cable appear under Hardware
Devices (Figure
Frequency at the default value (15 MHz). Click Next.
X-Ref Target - Figure 1-16
7. In the Open Hardware Target Summary window, click Finish. The wizard closes and the
Vivado Design Suite opens the hardware target.
8. A dialog to auto-detect the I/O links for the IBERT cores is displayed if the Vivado
Design Suite default warnings and notifications setting has not been changed. Press Yes
to automatically detect the links
X-Ref Target - Figure 1-17
VCU1287 IBERT Getting Started Guide
UG1203 (v2016.4) December 15. 2016
1-16). Select the xilinx_tcf_Digilent target and keep the JTAG Clock
Figure 1-16: Select Hardware Target
(Figure
Figure 1-17: Auto-Detect the Serial I/O Links
www.xilinx.com
Chapter 1: VCU1287 IBERT Getting Started Guide
1-17).
X15556-121416
X15555-121416
21
Send Feedback