Kubota WSM J Series Workshop Manual page 92

J SERIES, WSM
Valve Guide Replacing Tool
Application: Use to press out and press fit the valve guide.
[Z482, D722]
A 20 mm dia. (0.79 in. dia.)
9.96 to 9.98 mm dia.
B
(0.3921 to 0.3929 in. dia.)
5.5 to 5.7 mm dia.
C
(0.2165 to 0.2244 in. dia.)
D 200 mm (7.87 in.)
E 80 mm (3.15 in.)
F 40 mm (1.58 in.)
G 15 mm (0.59 in.)
H 5 mm (0.197 in.)
I 6.0 to 6.1 mm dia. (0.236 to 0.240 in. dia.)
J 18 mm dia. (0.71 in. dia.)
K 10.6 to 10.7 mm dia. (0.417 to 0.421 in. dia.)
L 7mm (0.276 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
[D1005, V1305]
A 20 mm dia. (0.79 in. dia.)
11.7 to 11.9 mm dia.
B
(0.460 to 0.468 in. dia.)
6.5 to 6.6 mm dia.
C
(0.256 to 0.259 in. dia.)
D 225 mm (8.86 in.)
E 70 mm (2.76 in.)
F 45 mm (1.77 in.)
G 25 mm (0.98 in.)
H 5 mm (0.197 in.)
I 6.7 to 7.0 mm dia. (0.263 to 0.275 in. dia.)
J 20 mm dia. (0.787 in. dia.)
K 12.5 to 12.8 mm dia. (0.492 to 0.504 in. dia.)
L 8.9 to 9.1mm (0.350 to 0.358 in.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.3 mm (0.012 in.)
S-46
GENERAL
W12349590
KiSC issued 10, 2016 A