Kubota WSM J Series Workshop Manual page 88

J SERIES, WSM
(J) Check Points of Every 2 Years
Changing Fuel Line and Clamp
CAUTION
• Stop the engine when attempting to check the fuel line.
• Never fail to check the fuel line periodically.
The fuel line is subject to wear and aging, fuel may leak out
onto the running engine, causing a fire.
1. Change the fuel lines (2) together with clamps (1) every 2 years,
or whenever they are found to be damaged.
(1) Clamp
Changing Radiator Hose and Clamp
CAUTION
• Before changing the radiator hoses and clamps, be sure to
stop the engine.
• Never open the pressure cap while the engine is running
under heavy loads or immediately after the engine has
stopped. Otherwise, hot water may spray out, scalding the
operator. So make it a habit to wait for about 10 minutes
before opening the cap.
1. To drain the coolant, open the drain cock and remove radiator
cap.
2. Change the radiator hoses (2) and clamps (1).
(1) Clamp
Changing Battery
1. See page S-40.
Changing Coolant
1. See page S-38.
S-42
GENERAL
(2) Fuel Line
W12258440
(2) Radiator Hose
W12236170
W1363603
W1363670
KiSC issued 10, 2016 A