Generator; Structure - Kubota WSM J Series Workshop Manual

J SERIES, WSM

1. GENERATOR

[1] STRUCTURE

(1) Rear Cover
(2) A.V.R. Assembly
(3) Brush Holder Assembly
(4) Rear Bracket
1. Stator Assembly
The main coil and sub coil for power generation are wound in the slots provided in the core.
The main coil generates the AC output and supplies A.V.R. assembly with a sensing voltage
The sub coil, working as an excitation coil, supplies the field current to the rotor through A.V.R. assembly.
2. Rotor Assembly
The coils are wound to magnetize the entire core.
3. Brush Holder Assembly
The excitation voltage from sub coil of the stator assembly is applied to the rotor coil through the A.V.R. assembly
rectifying circuit and the brush holder assembly.
4. Automatic Voltage Regulator (A.V.R.) Assembly
The A.V.R. assembly maintains the AC output voltage at a constant level.
(5) Stator Assembly
(6) Stator Housing
(7) Rotor Assembly
(8) Fan
(9) Fan (Z482 only)
M-1
GENERATOR
KiSC issued 10, 2016 A