Kubota WSM J Series Workshop Manual page 90

J SERIES, WSM
Special-use Puller Set
Code No: 07916-09032
Application: Use exclusively for pulling out bearings, gears and
other parts with ease.
Connecting Rod Alignment Tool
Code No: 07909-31661
Application: Use to check the connecting rod alignment.
Applicable range: Connecting rod big end I.D.
30 to 75 mm (1.18 to 2.95 in.dia.)
Connecting rod length.
65 to 330 mm (2.56 to 12.99 in.).
Red Check (Crack Check Liquid)
Code No: 07909-31371
Application: Use to check cracks on cylinder head, cylinder block,
etc.
Flywheel Puller
Code No: 07916-32011
Application: Use exclusively for removing the flywheel with ease.
Auxiliary Socket for Fixing Crankshaft Sleeve [Z482, D722]
Code No: 07916-34041
Application: Use exclusively for fixing the crankshaft sleeve.
S-44
GENERAL
W12285330
W12288380
W12296340
W12299460
W12302500
KiSC issued 10, 2016 A