Additional Installation Requirements - Alvarion BreezeACCESS VL System Manual

Chapter 2 - Installation
DC power cable
2.1.1.3 AU-D/E-SA Standalone Access Unit
The AU-D/E-SA installation kit includes the following components:
IDU indoor unit with a wall mounting kit
Mains power cord
AU-D/E-SA-ODU outdoor unit
Pole mounting kit for the AU-D/E-SA-ODU
In AU-D-SA kits: Antenna, including pole mounting hardware
RF cable
2.1.1.4 Optional Items Available from Alvarion
IDU to ODU Category 5 Ethernet cable with a shielded RJ-45 connector
crimped on one end and two shielded RJ-45 connectors (available in different
lengths. For more details refer to section
Tilt Pole Mounting kit for the new SU-A-ODU
A Y-cable for connecting directly to the IDU COM of the new SU-A-ODU for
configuration/performance monitoring using a portable PC.
2.1.1.5

Additional Installation Requirements

The following items are also required to install the BreezeACCESS VL system
components:
Ethernet cable (straight for connecting to a hub/switch etc., crossed for
connecting directly to a PC's NIC)
Crimping tool for RJ-45 connectors
Antenna, for E model units supplied without an antenna
Ground cables with an appropriate termination
Mains plug adapter or termination plug (if the power plug on the supplied AC
power cord does not fit local power outlets)
32
)
2.1.2
BreezeACCESS VL System Manual