Connecting The Grounding And Antenna Cables; Figure 2-7: Bottom Panel Of The Odu (All Odus Except To New Su-A-Odu, Shown Without The Sealing Assembly) - Alvarion BreezeACCESS VL System Manual

Chapter 2 - Installation
2.3.3 Connecting the Grounding and Antenna
Cables
The Grounding screw (marked ╤) is located on the bottom panel of the outdoor
unit (in the new SU-A-ODU it is located on the backside of the unit). The Antenna
RF connector (marked
To connect the grounding cable:
Connect one end of a grounding cable to the grounding terminal and tighten
1
the grounding screw firmly.
Connect the other end of the grounding cable to a good ground (earth)
2
connection.
To connect the RF cable (units with external antenna):
Connect one end of the coaxial RF cable to the RF connector on the top panel
1
of the unit
Connect the other end of the RF cable to the antenna.
2
The RF connectors should be properly sealed to protect against rain and
3
moisture.
(all ODUs except to new SU-A-ODU, shown without the sealing assembly)
42
) is located on the top panel of the AU-ODU/SU-E-ODU.
Figure 2-7: Bottom Panel of the ODU
BreezeACCESS VL System Manual