E.2.9 Security Parameters - Alvarion BreezeACCESS VL System Manual

MIB Parameter
*IpFilterRange
(*IpFilterEntry 3)
*IpFilterIdx
(*IpFilterEntry 4)
*DeleteOneUserFilter
(*UserFilterParams 3)
*DeleteAllUserFilters
(*UserFilterParams 4)
*DHCPUnicastOverrideFilter
(*UserFilterParams 5)
E.2.9 Security Parameters
MIB Parameter
*SecurityParams
(breezeAccessVLMib 9)
*AuthenticationAlgorithm
(*SecurityParameters 1)
*DefaultKey
(*SecurityParameters 2)
BreezeACCESS VL System Manual
Description
Applicable to SU/RB. An
address range for the IP
Filter entry. The first
address in the range is the
IP address (*iPID). O means
that the range is not used.
Either a mask or a range,
but not both can be used to
define an address group. If
the range is other than 0,
than the mask is ignored
and only the range value is
used to define the address
group.
Applicable to SU/RB.
Read-only. A table index for
the IP Filter entry.
Applicable to SU/RB.
Deletes a single selected
entry from the IP Filter table.
Applicable to SU/RB.
Deletes all entries from the
IP Filter table.
Applicable to SU/RB.
Enables or disables the
unicast DHCP messages,
overriding the IP Filtering
option.
Description
Applicable to all units.
Enables/disables the
authentication encryption
option.
openSystem: Authentication
messages are not encrypted.
sharedKey : Authentication
messages are encrypted.
Applicable to SU/RB. The ID
of the key to be used for
encrypting/decrypting the
authentication messages.
breezeAccessVLMib
Value/Range
Integer
0 - 255
Integer
1-8
Integer
deletefirstEntry (1)
deletesecondEntry (2)
deletethirdEntry (3)
deletefourthEntry (4)
deletefifthEntry (5)
deletesixthEntry (6)
deleteseventhEntry (7)
deleteeighthEntry (8)
cancelOperation (9)
na (255)
Integer
deleteAll (1)
cancelOperation (2)
na (255)
Integer
disable (1)
enable(2)
na (255)
Value/Range
Integer
openSystem (1)
sharedKey (2)
Integer
Range: 1 to 4.
247