Default Settings - Alvarion BreezeACCESS VL System Manual

Ethernet Port Negotiation Mode
Change System Location
Event Log Menu
Feature Upgrade
4.2.3.1 Reset Unit
The Reset Unit option enables resetting the unit. After reset, any modifications
made to the system parameters are applied.
4.2.3.2

Default Settings

The Set defaults submenu enables resetting the system parameters to a
predefined set of defaults or saving the current configuration as the set of
Operator Defaults.
The Default Setting options are available only to users with Administrator access
rights.
The available options are:
Set Defaults
Save Current Configuration As Operator Defaults
4.2.3.2.1 Set Defaults
The Set Defaults submenu enables reverting the system parameters to a
predefined set of defaults. There are two sets of default configurations:
Factory Defaults: This is the standard default configuration.
A
Operator Defaults: Operator Defaults configuration can be defined by the
B
Administrator using the Save Current Configuration As Operator Defaults
option in this menu. It may also be defined at the factory according to specific
operator's definition. The default Operator Defaults configuration is the
Factory Defaults configuration.
The current configuration file and the Operator Defaults configuration file can be
uploaded/downloaded by the unit using FTP. For more information, see section
4.2.3.7 option. These files can also be uploaded/downloaded remotely using TFTP
(see Appendix
The available options in the Set Defaults submenu are:
Set Complete Factory Defaults
Operation and Administration
B).
Menus and Parameters
91