Table 4-12: Mir Ranges And Defaults - Alvarion BreezeACCESS VL System Manual

Chapter 4 - Operation and Administration
4.2.6.6.2.2 MIR: Uplink (SU only)
Sets the Maximum Information Rate of the up-link from the SU to the AU. The
MIR value cannot be lower than the corresponding CIR value.
Available values range and default value are shown in Table 4-12.
The actual value will be the entered value rounded to the nearest multiple of 128
(N*128).
4.2.6.6.2.3 CIR: Downlink (SU only)
Sets the Committed Information Rate of the downlink from the AU to the SU. The
CIR value cannot be higher than the corresponding MIR value.
Available values range and default value are shown in Table 4-13.
The actual value will be the entered value rounded to the nearest multiple of 128
(N*128).
4.2.6.6.2.4 CIR: Uplink (SU only)
Sets the Committed Information Rate of the uplink from the SU to the AU. The
CIR value cannot be higher than the corresponding MIR value.
Available values range and default value are shown in Table 4-13.
The actual value will be the entered value rounded to the nearest multiple of 128
(N*128).
Unit Range (Kbps)
Type
SU-3 128-2,048
SU-6 128-4,096
SU-54 128-53,888
SU-I 128-2,048
180

Table 4-12: MIR Ranges and Defaults

MIR Uplink
Default (Kbps)
2,048
4,096
32,896
2,048
MIR Downlink
Range (Kbps)
128-3,072 3,072
128-6,016 6,016
128-53,888 32,896
128-6,016 6,016
BreezeACCESS VL System Manual
Default (Kbps)