Alvarion BreezeACCESS VL System Manual page 269

MIB Parameter
*TcpPortPriRTPRTCP
(*TcpPortRangeConfig 1)
*TcpPortRangeNum
(*TcpPortRangeConfig 2)
*TcpPortRangeTable
(*TcpPortRangeConfig 3)
*TcpPortRangeEntry
(*TcpPortRangeTable 1)
*TcpPortRangeStart
(*TcpPortRangeEntry 1)
*TcpPortRangeEnd
(*TcpPortRangeEntry 2)
*TcpPortRangeIdx
(*TcpPortRangeEntry 3)
*TcpPortRangeAdd
(*TcpPortRangeConfig 4)
BreezeACCESS VL System Manual
Description
Applicable to all units.
RTP/RTCP ports
prioritization option for TCP
packets.
rtpANDrtcp(1): the possible
RTP and RTCP packet with
destination port in the
defined port ranges will get
High priority.
rtpOnly(2): only possible
RTP packet (packet with
even destination port) with
destination port in the
defined port ranges will get
High priority.
Applicable to all units. Read-
only. The number of entries
in the TCP Port Range
Table.
Applicable to all units. Not
accessible. A table of TCP
port ranges used for
prioritization. The user can
define up to 64 ranges. An
entry is empty if start is
65535 and end is 0.
Applicable to all units. Not
accessible. A TCP Port
Ranges Table entry.
Applicable to all units. Read-
only. Start port of an TCP
Port Range
Applicable to all units. Read-
only. End port of an TCP
Port Range
Applicable to all units. Read-
only. Index of an TCP Port
Range entry
Applicable to all units. Add
port range(s) to TCP Port
Ranges Table.
Get operation will return an
empty string.
breezeAccessVLMib
Value/Range
Integer
rtpANDrtcp(1),
rtpOnly(2)
Integer
Integer
0-65535
Integer
0-65535
Integer
1-64
DisplayString
A range is defined by
<start>-<end> or <start>,
where <start> is the Start
Port of the range and <end>
is the End Port. If only
<start> is specified the range
is <start>-<start>. The value
of <start> and <end> are
between 0 and 65535.
The user can add several
ranges using a comma to
separate between ranges.
Example: 10-26,99,987-900.
243