Installation Requirements; Packing List; Table 2-1: Subscriber Unit Odu Types - Alvarion BreezeACCESS VL System Manual

Chapter 2 - Installation
2.1

Installation Requirements

This section describes all the supplies required to install the BreezeACCESS VL
system components and the items included in each installation package.
NOTE
Installation requirements for SU-I are provided in section 2.5 on page 48.
2.1.1

Packing List

2.1.1.1 SU-A/E Subscriber Unit
The SU-A/E installation kit includes the following components:
IDU indoor unit with a wall mounting kit
Mains power cord
Any of the following Outdoor Units:
SU Type
SU-A-ODU
New SU-A-ODU
SU-E-ODU
NOTE
The SU-A-ODU and SU-E-ODU are supplied without the waterproof sealing assembly for the
INDOOR connector. The sealing assembly is supplied with the IDU to ODU cable kit..
Pole mounting kit for the ODU (the kit for the new, smaller-size ODU is
different from the kit for all other ODUs)
30

Table 2-1: Subscriber Unit ODU Types

Antenna Description
Vertically polarized high-gain flat antenna integrated on the front panel
Vertically/horizontally polarized high-gain flat antenna integrated on
the front panel.
The smaller size new SU-A-ODU is available in the 5.4 GHz and 5.8
GHz bands.
A connection to an external antenna (not included)
BreezeACCESS VL System Manual