Connecting The Omni Antennas; Connecting A Detached Antenna; Connecting The Unit To The Power Supply And To The Cpe - Alvarion BreezeACCESS II System Manual

2-6

Connecting the Omni Antennas

1. Connect the omni antennas to antenna ports 1 and/or 2 on the sides of the
unit. Push each antenna connection carefully into a port with the antenna
facing downward and carefully turn the antenna upward to firmly lock it.
2. Extend the antennas upward vertically in relation to the floor to achieve
vertical polarization.

Connecting a Detached Antenna

1. Connect the special adapter to antenna port 1 (marked 1) on the side of the
unit. Push the adapter carefully into the hole using the alignment markings
on the adapter and the unit, and turn it 180 degrees to firmly lock it.
2. Connect the antenna cable to the adapter. If you use a heavy cable, secure
the cable so as to prevent applying excessive force on the adapter and
connector.
Connecting the Unit to the Power
Supply and to the CPE
The unit operates on a power input of 5VDC, supplied by the power
transformer included with the unit.
Manual Revision: 3.0
Figure 2-1: SU-R Unit with Voice Support
BreezeACCESS Version 4.3 Installation