Info Screens Menu; Show Unit Status - Alvarion BreezeACCESS II System Manual

Menus and Parameters

Info Screens Menu

BreezeACCESS/AU-BS
Official Release Version – 4.0.40
Release Date: Thu Dec 20 21:05:08 2001
Info Screens
====================
1 – Show Unit Status
2 – Show Basic Parameters
3 – Show Advanced Parameters
S – Show All Parameters
>>>
The Info Screens menu enables viewing of the current values of various
parameter sets. The parameter sets are identical to the main parameter
groups in the configuration menus. The user can view a specific
parameter set or can elect to view all parameters (S). This menu is
available for all access levels.

Show Unit Status

The Show Unit Status menu displays the current values of the following
parameters:
Unit Type – Identifies the unit's function as one of the following:
Access Unit, Subscriber Unit or GPS and Alarms Module.
Unit MAC Address – Displays the unit's unique IEEE MAC address.
Unit Hardware Version – Displays the hardware version of the unit
(the indoor module of IF based products).
Flash Type – Displays the type and size of the Flash memory.
Flash Versions
Current Version – Displays the software version that is
currently active.
Shadow Version – Displays the software version currently
defined as the shadow (backup) version.
Version After Reset – Displays the software version that will be
used after the next reset.
Figure 2-1: Info Screens Menu
BreezeACCESS Version 4.3 System Manual
2-3