Alvarion BreezeACCESS II System Manual page 257

Appendix C
Bridge Parameters
MIB Parameter
(Location in Parenthesis)
*BridgeParameters
710.3.3. 5
(brzAccessMib.5)
*EthBroadcastFiltering
710.3.3. 5.1
(*BridgeParameters 1)
*VLANSupport
710.3.3. 5.2
(*BridgeParameters 2)
*VlanID
710.3.3. 5.2.1
(*VLANSupport 1)
*EthernetLinkType
710.3.3. 5.2.2
(*VLANSupport 2)
*ManagementVID
710.3.3. 5.2.5
(*VLANSupport 5)
*VoicePriorityTag
710.3.3. 5.2.6
(*VLANSupport 6)
*VLANForwarding
710.3.3. 5.2.7
(*VLANSupport 7)
*VlanForwardingSupport
710.3.3. 5.2.7.1
(*VLANForwarding 1)
*VlanForwardingTable
710.3.3. 5.2.7.2
(*VLANForwarding 2)
*VlanForwardingEntry
710.3.3. 5.2.7.2.1
(*VlanForwardingTable 1)
*VlanForwardingIdx
710.3.3. 5.2.7.2.1.1
(*VlanForwardingEntry 1)
*VlanIdForwarding
710.3.3. 5.2.7.2.1.2
(*VlanForwardingEntry 2)
*VLANRelaying
710.3.3. 5.2.8
(*VLANSupport 8)
*VlanRelayingSupport
710.3.3. 5.2.8.1
(*VLANRelaying 1)
*VlanRelayingTable
710.3.3. 5.2.8.2
(*VLANRelaying 2)
Description
Bridge parameters.
Applicable to SU only.
Enables/disables the filtering of Ethernet
(layer2) broadcasts.
disable: No filtering.
ethOnly: Filter broadcasts received on the
Ethernet port only.
wlanOnly: Filter broadcasts received on the
Wlan port only.
bothWlanAndEth: Filter broadcasts received on
both ports.
Applicable to AU, SU and GU. VLAN Support
Parameters.
Applicable to SU only. VLAN ID for data frame
tagging. Applicable to Access Link only.
Applicable to AU and SU. VLAN support mode
(Link Type).
The Access Link option is not available for AU.
Applicable to AU, SU and GU. VLAN ID for
management frame tagging. For SUs with voice
support it is also used for tagging voice frames
(RTP packets).
Applicable to SU with voice only. Enables
prioritization tagging of voice (RTP) frames
according to IEEE 802.1p when
*ManagementVID is 65535 (No VLAN).
VLAN Forwarding Feature Parameters
Applicable to AU and SU. Enables or disables
VLAN Forwarding. (applicable in Trunk links
only)
Applicable to AU and SU. A VLAN Forwarding
Table of up to 20 VLAN IDs of devices to which
data frames are forwarded when VLAN
Forwarding is Enabled. (applicable in Trunk
links only). Not accessible.
Applicable to AU and SU. A VLAN Forwarding
Table entry. (applicable in Trunk links only). Not
accessible.
Applicable to AU and SU. A read only table
index for a VLAN entry in the VLAN Forwarding
Table.
Applicable to AU and SU. The list of VLAN ID's
in the VLAN ID Forwarding Table. To Remove a
VLAN ID - SET the corresponding entry to 0. To
Add a new VLAN ID SET an entry which is
currently 0.
VLAN Relaying Feature Parameters
Applicable to AU only. Enables or disables
VLAN Relaying. (applicable in Trunk links only)
Applicable to AU only. A VLAN Relaying Table
of up to 20 VLAN IDs of devices to which data
frames are relayed when VLAN Relaying is
Enabled. (applicable in Trunk links only). Not
accessible.
BreezeACCESS Version 4.3 System Manual
C-9
Values/Range
Integer
disable (0)
ethOnly (1)
wlanOnly (2)
bothWlanAndEth(3)
na (255)
Integer
1-4094.
0 means not applicable
Integer
accessLink (1)
trunkLink (2)
hybridLink (3)
Integer
1-4094
65535 means no VLAN
tagging.
Integer
disable (0)
enable (1)
na (255)
Integer
disable (0)
enable (1)
na (255)
Integer
1 - 20
Integer
1-4094
0=remove entry.
Integer
disable (0)
enable (1)
na (255)