Alvarion BreezeACCESS II System Manual page 289

Appendix C
MIB Parameter
(Location in Parenthesis)
*AlternateGkOption
710.3.4.1.24
(*DialingParams 24)
*AlternateGkIPAddress
710.3.4.1.25
(*DialingParams 25)
*CallerID
710.3.4.1.26
(*DialingParams 26)
*StopDialingIndicator
710.3.4.1.27
(*DialingParams 28)
*StopDialingTimeOut
710.3.4.1.28
(*DialingParams 28)
*OverlapSending
710.3.4.1.29
(*DialingParams 29)
Description
Setting the Alternate Gatekeeper
feature.
EnableManualDiscovery: the
Alternate Gatekeeper IP address is
specified by the Alternate
Gatekeeper IP Address parameter.
EnableAutomaticDiscovery: the
Alternate Gatekeeper IP address is
received from the Primary GK.
To set the Alternate Gatekeeper IP
address when Alternate Gatekeeper
Option is set to
enableManualDiscovery.
To defines whether the unit will
support generation of Caller ID (CID)
signaling and if CID is supported,
which standard will be used.
disable (0): No CID signalling
etsiDtAs (1): CID signalling in
accordance with ETSI 300-659-1,
using Dual Tone Alerting Signal
etsiRpAs (2): CID signalling in
accordance with ETSI 300-659-1,
using Ringing Pulse Alerting Signal
etsiRinging (4): CID signalling in
accordance with ETSI 300-659-1,
transmitting data during the first long
silence between two ring patterns.
bellcoreMdmf (5): CID signaling in
accordance with Bellcore 202, using
Multiple Data Message Format
(MDMF) which includes a name field
in addition to the date, time and
number.
bellcoreSdmf (6): CID signaling in
accordance with Bellcore 202, using
Single Data Message Format
(SDMF) which includes the date,
time and number.
To enable/disable the use of the #
sign to indicate end of dialing
disable: The # sign is interpreted as
a part of the dialed sequence. End of
dialing is determined by the
*StopDialingTimeOut parameter.
enable: The # sign is interpreted as
indicating end of dialing sequence.
To define the inactivity time following
the last dialed digit that will be
identified by the unit as an indication
to end of dialing.
Disable/enable overlap sending.
When enabled, each dialed digit is
transmitted immediately. When
disabled, dialed digits are
accumulated and transmitted
according to the rules set by other
dialing parameters.
When enabled, it overrides the
setting of other dialing parameters as
follows: IP Dialing Option, Dialing
Prefix Option and Stop Dialing
Indicator are disabled even if the
applicable parameter is set to
Enable. Automatic Prefix is not used
and Stop Dialing Timeout has no
effect.
BreezeACCESS Version 4.3 System Manual
Values
Integer
disable (0)
enableManualDiscovery (1)
enableAutomaticDiscovery (2)
na (255)
IP Address
Integer
disable (0)
etsi3006591DtAs (1)
etsi3006591RpAs (2)
etsi3006591Ringing (4)
bellcore202Mdmf (5)
bellcore202Sdmf (6)
na (255)
Integer
disable (0)
enable (1)
na (255)
Integer
3 – 60 (seconds)
na (255)
Integer
disable (0)
enable (1)
na (255)
C-41