Standalone Au-A/E-Ni Access Unit; Other Items Required For Installation - Alvarion BreezeACCESS II System Manual

IF Based Equipment
BS-PS DC Power Supply (one or two per
chassis)
BS-PS power supply module
DC power cable
BS-PS-AC Power Supply (one or two per
chassis)
BS-PS-AC power supply module
AC power cable
GU-A-BS GPS and Alarms System
BS-GU module
GU-RA GPS antenna and receiver
1" threaded mounting pole for the GU-RA GPS antenna
Antenna Mounting kit

Standalone AU-A/E-NI Access Unit

Outdoor unit:
AU-RA with integral antenna
–Or–
AU-RE with a connector to an external antenna (not included)
Pole mounting kit for the outdoor unit
AU-NI indoor unit
Wall mounting kit for the AU-NI unit
AU-PS power supply with a mains power cord
Monitor cable
Documentation CD
Other Items Required for
Installation
IF cable* (available from Alvarion in different lengths)
Grounding cable with an appropriate termination
Antenna* and RF cable* according to specific installation conditions
for units with external separate antennas
Ethernet cable to connect the equipment to the Ethernet outlet (see
Table 1-1‚ page
Telephone cord for connecting a Subscriber Unit with voice support
to a telephone set (RJ 11 connector at the Subscriber Unit side)
1-4)
BreezeACCESS Version 4.3 System Manual
1-3