Alvarion BreezeACCESS II System Manual page 268

C-20
MIB Parameter
(Location in Parenthesis)
*ACSEOption
710.3.3. 6.27.1
(*ACSEParameters 1)
*ACSEDwellTime
710.3.3. 6.27.2
(*ACSEParameters 2)
*ACSEMaximumVoiceSessions
710.3.3. 6.27.3
(*ACSEParameters 3)
*ACSENumberOfDataRetransmissions
710.3.3. 6.27.4
(*ACSEParameters 4)
*ACSENumberOfVoiceRetransmission
s
710.3.3. 6.27.5
(*ACSEParameters 5)
*OperatorESSIDOption
710.3.3. 6.28
(*AirInterface 28)
*MaxNumOfAssociations
710.3.3. 6.29
(*AirInterface 29)
*CurrentTransmitPowerControl
710.3.3. 6.30
(*AirInterface 30)
* SiteProprietary
710.3.3. 6.31
(*AirInterface 31)
*SPNumOfFreqs
710.3.3. 6.31.1
(* SiteProprietary 1)
*FirstSetNumOfFreqs
710.3.3. 6.31.1.1
(*SPNumOfFreqs 1)
*SecondSetNumOfFreqs
710.3.3. 6.31.1.2
(*SPNumOfFreqs 2)
*ThirdSetNumOfFreqs
710.3.3. 6.31.1.3
(*SPNumOfFreqs 3)
Manual Revision: 3.0
Description
Applicable for AU, SU and GU.
Read-only in the SU. Disable/enable
the ACSE Voice Scheduler
mechanism.
Applicable for AU, SU and GU.
Read-only. The dwell time when the
*ACSEOption is enabled. Currently
set to 60 milliseconds.
Applicable to AU only.
The maximum number of
simultaneous ACSE voice sessions
permitted to guarantee minimum
quality. Applicable only when the
*ACSEOption is enabled.
Applicable to SU and AU. Maximum
times to retransmit an
unacknowledged data packet.
Applicable only when the
*ACSEOption is enabled.
Applicable to SU with voice and AU.
Maximum times to retransmit an
unacknowledged voice packet.
Applicable only when the
*ACSEOption is enabled.
Applicable for AU only. The
Enabling/disabling the use of the
Operator ESSID.
Sets the upper limit for the number of
Subscriber Units that can be
associated with the AU.
Applicable for both AU and SU IF
based SU units (SU-A/E) and SU-R-
3.5ab units. Displays the current
value that is used to control the
transmit power level of the unit. If
brzaccAtpcOption is disabled, it
equals the value of
brzaccTransmitPowerControl
(SU-A/E units) or
brzaccCurrentTxPwrLvl (SU-R-3.5ab
units).
If brzaccAtpcOption is enabled, its'
value may change depending on the
ATPC algorithm.
Site Proprietary parameters.
Applicable only to BreezeACCESS II
SU and AU configured to work in the
special Site Proprietary hopping
standard.
Number of frequencies in the
proprietary hopping sets parameters.
Read-Only. Number of frequencies
in the first set.
Read-Only. Number of frequencies
in the second set.
Read-Only. Number of frequencies
in the third set.
BreezeACCESS Version 4.3 System Manual
Values/Range
Integer
disable (0)
enable (1)
Integer
60 (mseconds)
na (255)
Integer
0-15
na (255)
Integer
0-100
Integer
0-100
Integer
disable (0)
enable (1)
na (255)
Integer
0-512
Integer
SU-A/E in BreezeACCESS II, XL and MMDS:
0-15,
SU-A/E in BreezeACCESS V: 0-7
SU-R-3.5ab:0-2
Integer
na (255)
Integer
na (255)
Integer
na (255)