Alvarion BreezeACCESS II System Manual page 279

Appendix C
MIB Parameter
(Location in Parenthesis)
AtpcTransmittedMessages
710.3.3. 8.6.2
(*AtpcCounters 2)
AtpcReceivedMessages
710.3.3. 8.6.3
(*AtpcCounters 3)
*AUAlarms
710.3.3. 8.7
(*SiteSurvey 7)
*AUAlarmsOption
710.3.3. 8.7.1
(*AUAlarms 1)
*AUAlarmsLearningPeriod
710.3.3. 8.7.2
(*AUAlarms 2)
*AUAlarmsTestCycle
710.3.3. 8.7.3
(*AUAlarms 3)
*AUAlarmsTrafficStatistics
710.3.3. 8.7.4
(*AUAlarms 4)
*TrafficStatisticsTable
710.3.3. 8.7.4.1
(*AUAlarmsTrafficStatistics 1)
*TrafficStatisticsEntry
710.3.3. 8.7.4.1.1
(*TrafficStatisticsTable 1)
*TrafficStatisticsType
710.3.3. 8.7.4.1.1.1
(*TrafficStatisticsEntry 1)
*TrafficStatisticsCurrentRate
710.3.3. 8.7.4.1.1.2
(*TrafficStatisticsEntry 2)
*TrafficStatisticsAverageRate
710.3.3. 8.7.4.1.1.3
(*TrafficStatisticsEntry 3)
*MinorAlarmMinimumDelta
710.3.3. 8.7.4.1.1.4
(*TrafficStatisticsEntry 4)
Description
Applicable to IF based AU. The total
number of ATPC messages
transmitted by the unit since last
reset.
Applicable to SU units only. The
number of ATPC messages
received by the unit since
last reset regardless of whether the
unit supports ATPC.
Applicable to IF-based AU only. AU
Alarms parameters.
Applicable to IF-based AU only.
Disable/enable the AU Alarms test
mechanism.
Applicable to IF-based AU only.
The time period after reset or after
enabling the AU Alarms Option that
is dedicated to accumulating
information only. During this period
the AU does not activate alarms,
except to the No Associations
alarm.
Applicable to IF-based AU only.
The tine interval between two
consecutive polling message
transmissions. This is also the time
interval used for calculating the
current averages for the various
traffic statistics.
Applicable to IF-based AU only.
Traffic Statistics parameters.
Applicable to IF-based AU only. Not
accessible. AU Alarms Traffic
Statistic Table containing traffic
statistics parameters and test
results.
Applicable to IF-based AU only. Not
accessible. An entry in the AU
Alarms Traffic Statistic Table.
Applicable to IF-based AU only.
Read-only. The traffic statistics'
type of an entry in the AU Alarms
Traffic Statistics Table. Serves also
as the index of the entry.
Applicable to IF-based AU only.
Read-only. The current rate
calculated for the relevant statistics
type.
Applicable to IF-based AU only.
Read-only. The average rate
calculated since the last time the
unit was reset (or since the AU
Alarms Option was enabled) for the
relevant statistics type.
Applicable to IF-based AU only.
Read-write. The minimum
difference between the Traffic
Statistics Current Rate and the
Traffic Statistics Average Rate for
activating a minor severity alarm for
the relevant statistics type. Another
prerequisite for activating the alarm
is that the Traffic Statistics Current
Rate exceeds the Traffic Statistics
Minor Alarm Threshold.
BreezeACCESS Version 4.3 System Manual
Values/Range
Integer
Integer
Integer
disable (0)
enable (1)
Integer
1 – 1440 (minutes)
Integer
1 – 1440 (minutes)
Integer
retransmissionsRate (1)
droppedFramesRate (2)
crcErrorRate (3)
duplicateFramesRate (4)
Integer
0 – 100 (%)
na (255)
Integer
0 – 100 (%)
na (255)
Integer
0 – 100 (%)
C-31