The DS.11 Configuration Utility
When an event occurs, a trap is sent to the defined host address (the setting is made
in the SNMP Parameters tab described in Section 3.3.3). This window displays the
recorded traps.
Click the
3.3.10 Debug Info
This option allows you to create a log file named BreezeLog.log. You can send this
log file to BreezeCOM technical support and receive help based on the information
recorded in this file.
To start recording, open the Debug Info option and select Start Log.
When you finish recording (usually after 24 hours) select Stop Log and send the
file to BreezeCOM technical support representatives.
User's Guide
button to clear the display area.
3-26
BreezeNET BU-DS.11/RB-DS.11