Setting A Temporary Heating Flow Temperature; Managing Boilers In Cascade; Accessing The Information Menu - Baxi POWER HT+ Series Installation And Service Manual

Fig.
131
Time central heating CH1
Default values
Fig.
132
Temporary setpoint
Tab.59 Configuration lead cascade boiler
Parameter num­ Parameter
ber
3540 Auto source seq ch'over
3541 A A uto source seq exclusion
9.3

Accessing the information menu

7609474 - v02 - 04092014
Yes
MENU
MW-3000142-EN-02

9.2.14 Setting a temporary heating flow temperature

MENU
MW-3000143-EN-02

9.2.15 Managing boilers in cascade

Boilers in cascade are controlled and managed by the lead boiler.
6. Select the Y Y es parameter by turning the
7. Confirm the parameter selection by pressing the
Note
Press the key to return to the main screen.
MENU
The reset of the timer program to zero has been successful.
1. From the control panel main screen, turn the
or reduce the temperature value.
2. Confirm the menu selection by pressing the button
1. Set the following parameters on the lead boiler:
Setting
Number of hours
First
First and last
Last
None
See
List of installer parameters, page 74.
1. Go to the parameters menu by pressing the
9 Settings
button.
button.
button to increase
.
Description
Operating time before the auto­
matic change of the lead boiler
sequence.
Exclusion of the boiler or boilers
from the periodic sequence rota­
tion.
key.
MENU
105