Setting A Temporary Heating Flow Temperature; Changing The Operating Mode - Baxi POWER HT+ 1.50 User Manual

Fig.18 Selecting the Language parameter
Operator section
Change language
Fig.19 Confirming the selected temperature
Temporary setpoint
Fig.20 Selecting the Regime CH1 parame­
ter
----------------------------------------------------
Standby/operation
Hot water boost
7609475 - v04 - 15072015
English
MENU
MW-3000058-EN-02
MENU
MW-3000143-EN-02
MENU
MW-3000059-EN-02
4. Confirm the menu selection by pressing the button
The language currently used flashes.
5. Modify the parameter by turning the
6. Confirm the setting by pressing the
Note
Press the key to return to the main display.
MENU

6.2.3 Setting a temporary heating flow temperature

1. From the control panel main screen, turn the
or reduce the temperature value.
2. Confirm the menu selection by pressing the button

6.2.4 Changing the operating mode

1. Press the key to access the shortcuts menu.
2. Select the parameter Central heating mode CH1 by turning the
button.
3. Press the button to confirm.
6 Settings
.
button.
button.
button to increase
.
POWER HT + 25