Selecting A Heating Circuit - Baxi POWER HT+ Series Installation And Service Manual

Fig.
103
----------------------------------------------------
Chimney sweep function
Controller stop function
Fig.
104
Chimney sweep function
Controller stop function
Manual control
Fig.
105
Controller stop function
On
Fig.
106
304:Controller stop function
Controller stop setpoint
Adjust? 80%
MENU
7609474 - v02 - 04092014
MENU
MW-3000086-EN-02
MENU
MW-3000087-EN-02
MENU
MW-3000088-EN-02
0% 100%
MW-3000089-EN-02
2. Select the C C ontroller stop function parameter by turning the
ton.
3. Press the button to confirm.
Controller stop function O O n is displayed.
4. Press the button to confirm.
304:Controller stop is displayed.
5. Press the button to modify the thermal output value from 0 to
100% by turning the
6. Press the button to confirm the thermal output.
Note
Press the key to return to the main display and reactivate the
MENU
control system.

9.2.11 Selecting a heating circuit

The control panel can manage up to three different heating circuits.
button.
9 Settings
but­
95