Setup Menus; Presets - Graco HydroShield Instructions Manual

Setup Menus

Setup Menus Menus
Setup Setup Menus
To unlock the Setup menus, press the Setup key
.
If a password is configured, enter the password.
(Default: 0000.) To configure a password, see
Advanced Screen 1, page
To exit the Setup menus and return to the Home
screen, press the Setup key
To edit the information on a screen press the Enter
Screen key .
56
59.
.

Presets

Presets Presets
Use this screen to preconfigure spray settings for
different fluids, parts, and scenarios.
For information about using Preset 0-99, see
Adjust the Gun Fluid and Air Settings, page
Preset: The number assigned to this set of spray Preset: Preset:
parameters, paint color, and purge sequence.
Air: Air: Air pressure delivered through the gun. Air:
Fluid: Fluid: Fluid pressure delivered through the gun. Fluid:
Color: Indicate a color number to associate with this
Color: Color:
preset.
Purge: Purge: Indicate a custom purge sequence Purge:
as configured in a Purge screen. See
Purge Screens 1–5, page
Custom Fill: Fill: Check the box to customize when the
Custom Custom Fill:
pump fills and when the light tower indicates material
levels in the pump. Leave the box unchecked to use
the global pump settings in Pump Screen 1. See
Pump Screen 1: Pump Volume, page
38.
57.
58.
3A7370C