Shutdown - Graco HydroShield Instructions Manual

To use use Preset Preset 1 1 1 through through 99:
To To use Preset through
1. Press the right arrow
on the menu bar.
2. Press the Enter Screen button
screen to edit the current settings.
3. Use the up and down arrows
to the Preset field.
4. Enter the Preset number that you would like to
use.
5. Press the Enter button
6. Press the Exit Screen button
3A7370C
99:
99:
until Home appears
to enter the
to navigate
to register the value.
.

Shutdown

Shutdown Shutdown
1. Discharge the system voltage. Follow the
Fluid Voltage Discharge and Grounding
Procedure, page 29.
2. Flush the gun. See
(Systems without Color Change), page 33
Flush the System (Color Change Enabled
Systems), page 35.
3. Follow the Pressure Relief Procedure, page
4. Press the Stop button
interface to change to Off mode.
Operation
Flush the System
or
31.
on the control
39