Graco HydroShield Instructions Manual page 65

Maintenance Maintenance 4: 4: 4: Fluid Maintenance Fluid Fluid Valve
View fluid valve actuation counts, reset those counts,
and test the valves.
Shuttle Fluid Shuttle Shuttle Fluid In: Fluid In: The fluid valve near the system fluid In:
inlet.
Pump Pump Fluid Pump Fluid In: Fluid In: The fluid valve near the fluid inlet on In:
the isolation fluid pump. (Not present in WMBL00,
WBML01.)
Pump Pressure: Pressure: The valve that supplies air pressure
Pump Pump Pressure:
to the isolation fluid pump.
3A7370C
Valve Resets Valve Resets and Resets and Test and Test Test Maintenance 5: 5: 5: Misc Maintenance Maintenance Misc Valve Misc
Use this screen to view system valve actuation
counts for the ground rod and gun flush box, reset
those counts, and test the solenoid valves.
Ground Rod: Rod: Activates (raises) the ground rod to
Ground Ground Rod:
allow the system to build a charge. Use this option to
perform ground rod maintenance. See the steps in
Check and Lubricate the Ground Rod, page
Note
The ground rod activates (raises) only if the
pneumatic door switch is closed.
Unchecked box: The system is grounded.
Checked box: The system is ungrounded.
Gun Gun Flush Gun Flush Box: Flush Box: Activates the gun trigger to the gun Box:
flush box.
Setup Menus
Valve Resets Valve Resets and Resets and Test and Test Test
72.
65