Error Codes - Graco HydroShield Instructions Manual

Error Codes

Error Codes Codes
Error Error Codes
System errors alert the operator of a problem in the
system. When any error occurs:
• Error buzzer sounds (unless operating in silent
mode).
• An error popup screen displays the active error
code.
• The Status bar displays the active error code.
The error is saved in the error or event log.
Table 10 10 Control Control Interface Interface Errors
Table Table 10 Control Interface
Type
Code Code Code Type Type
EVUX Advisory
WSUX Advisory
WXUU
Advisory
WXUD
WX00 Alarm
84
Errors
Errors
Name
Name Name
USB Disabled
USB Configuration
Error
USB Upload Error
USB Download Error
Software Error
There are four types of error: Alarm, Deviation,
Advisory, and Record.
If an Alarm Alarm occurs, operation stops and an error is Alarm
recorded in the system.
A Deviation Deviation Deviation records an error in the system but does
not shut down the equipment. The deviation must be
acknowledged by the user.
Advisory records an event in the system and
An Advisory Advisory
clears itself after 60 seconds.
A Record Record saves relevant system events in the Record
background. This information can be reviewed on
the Error Log Screen.
To Clear Clear Error Error and
To To Clear Error
When a deviation or alarm occurs, be sure to
determine the error code before resetting it. Go to
the Events Screen to view the last 200 errors, with
date and time stamps. See
If an alarm has occurred, correct the cause before
resuming operation.
To acknowledge a deviation or clear an alarm, press
.
Description
Description Description
User installed a USB
device in the USB port
when USB downloads
were disabled.
USB configuration
file does not match
expected; checked on
startup.
User installed an
incompatible USB
device in the Control
Interface USB port.
An unexpected
software error has
occurred.
and Restart Restart
and Restart
Events Screen, page
Solution Solution Solution
Go to Advanced Screen 3 and
check the field for Enable USB
Downloads/Uploads, as described in
Advanced Screen 3, page
Reinstall software. Follow the steps
in Update the System Software,
page 45.
Repeat the process with a compatible
USB device.
Call Graco technical support.
54.
60.
3A7370C