Graco HydroShield Instructions Manual page 117

ID ID ID Part No. No. Description
Part Part No. Description Description
C1 17D923 Bulkhead Cable (59)
C2 121001 CAN Cable (43)
C3 17D923 Bulkhead Cable (59)
C4 CAN Cable (611) (Used only
for color change enabled sys-
C5
121002 tems. See
Pneumatic and Wiring
Connections, page
D1 119159 Air Flow Sensor (to port 5 or
6; interchangeable) (30)
D2 119159 Air Flow Sensor (to port 5 or
6; interchangeable) (30)
D3 287839 Pump Sensor Assembly
(labeled P2) (447)
D4 24W120 Proximity Sensor (upper;
labeled P3) (447)
3A7370C
Color Change:
118.)
ID ID ID Part No. No. Description
Part Part No. Description Description
D5 24W120 Proximity Sensor (lower;
labeled P4) (447)
D6 25R034 Bleed Resistor (24)
D7 26C774 Power Supply (47)
E1 Green/Yellow (20 in./50.8 cm)
Wire
E2 Green/Yellow (5 in./12.7 cm)
(14
E3 Red (6 in./15.2 cm)
gauge)
E4 Red (10 in./25.4 cm)
E5 17J191 Green/Yellow (81)
Note 1: 1: 1: Tuck the ground wire Note Note
into the corner of the cabinet
so that it doesn't interfere with
closing the door.
Repair
117