Table of Contents
Advertisement
Shutdown and Cleaning
NOTICE
Failure to properly clean sprayer after each use will result
in hardened materials, damage to the sprayer, and the
warranty will no longer be valid.
Flushing Sprayer
Use only water-based or mineral spirit-type materials
with flash point greater than 100° F (38° C). Do not use
materials which state "FLAMMABLE" on the packaging.
For more information about your material, request MSDS
from distributor or retailer.
Spraying certain materials may cause static build-up
in the sprayer that can result in static shock to the
user. If this occurs, first ensure the material has a flash
point greater than 100° F (38° C) and does not state that it
is FLAMMABLE anywhere on the package. If still feeling a
static shock, the material likely contains a non-mineral
spirits fluid such as, but not limited to, xylene, toluene, or
naphtha, which can build up static. Switch to an alterna-
tive material.
Use oil-based material outdoors or in a well-ventilated
indoor area with a flow of fresh air.
Keep spray area well-ventilated. Keep a good supply of
fresh air moving through the area.
NOTICE
Protect the internal parts of this sprayer from water.
Do not submerge the sprayer in cleaning fluid. Openings
in shroud allow cooling of mechanical parts and electron-
ics inside. If water gets into these openings, the sprayer
could malfunction or become permanently damaged.
1. Engage trigger lock and pull relief valve UP to
release pressure.
ti14994a
14
2. Remove material cup and properly dispose cup liner
3. Remove and clean sprayer intake tube and screen
4. Clean cup if not using a liner, and fill with water or
5. Reconnect material cup and shake sprayer to move
ti14999a
or excess material.
ti15000a
with water (or flushing fluid) and a brush every time
you flush the sprayer. Reconnect intake tube.
ti15002a
appropriate flushing fluid.
ti15001a
clean water around and clean all areas inside of
cup and underside of sprayer.
ti15441a
Shutdown and Cleaning
3A1456A
Advertisement
Table of Contents
