Network Connection Methods That Can Be Selected In Each Windows Operating System - Konica Minolta bizhub 350 Quick Manual

Hide thumbs Also See for bizhub 350:
Table of Contents

Advertisement

Setting up network printing
Note
When using a Port 9100 connection under Windows 98 Second Edition
or Windows Me, it may be necessary to install the Peer to Peer Printing
Tool.
To obtain the Peer to Peer Printing Tool, consult the dealer where you
purchased this machine.
With NetWare
The Novell NetWare 4.x—6 print server functions are supported.
You can connect this printing system to a network using Novell NetWare
4.x—6 as the network operating system and send print jobs from the client
to the print server (network controller). The three modes supported are as fol-
lows:
- Nprinter
- Pserver
- NDS/NDPS
Note
For details on the NetWare functions, refer to the NetWare operation
manual.
With Macintosh
You can print from your Macintosh computer using LPR or AppleTalk.
You can connect this printing system to a print server in an AppleTalk envi-
ronment and send print jobs from the Macintosh computer to this machine.
Network connection methods that can be selected in each Windows op-
erating system
This chapter describes the settings that must be specified for network print-
ing.
Setting procedures differ depending on the method of networking printing
used (Windows, LPR, or IPP printing). Select the best method of network
printing for your Windows environment.
200/250/350
3
3-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 250Bizhub 200

Table of Contents