Slot For The Memory Card - Siemens SINAMICS S120 Manual

Cabinet modules liquid cooled

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Slot for the memory card

Insertion direction for the memory card

Only insert the memory card as shown in the photo above (arrow at top right).

Data loss when the Control Unit with memory card is returned

When returning a defective Control Unit for repair or testing, the data on the memory card

(parameters, firmware, licenses, etc.) could be lost.

• Do not return the memory card as well, but rather keep it in a safe place so that it can be

inserted in the replacement unit.

Cabinet Modules liquid cooled

Equipment Manual, 04/2020, A5E37067587A

Slot for the memory card

9.21 K90, Control Unit CU320-2 DP