Mechanical installation
3.3 Installing
The following requirements must be met to ensure the full functionality of the cabinet units:
● The foundation must be level and horizontal.
● Irregularities must be leveled out.
● Gaps where air can enter, created when aligning (e.g.:
closed.
3.3.2.3
Shipping and handling indicators
The cabinet units are equipped with tilt and shock indicators to monitor for damage during
transit.
Figure 3-3
Figure 3-4
Position of the shipping and handling indicators
The tilt indicators are affixed to the top of the cabinet unit inside the doors.
The shock indicators are affixed to the bottom of the cabinet unit inside the doors.
52
Tilt indicator
Shock indicator
①
in the diagram) must be
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A