X150 P1/P2 Profinet Connection - Siemens SINAMICS S120 Manual

Options
9.23 K95, Control Unit CU320-2 PN
9.23.7

X150 P1/P2 PROFINET connection

Table 9- 45
Connector
Connector type: RJ45 socket
Cable type: PROFINET
Note
Connecting cables
The PROFINET interfaces support Auto MDI(X). It is therefore possible to use both crossed
and uncrossed cables to connect the devices.
For diagnostic purposes, the two PROFINET interfaces are each equipped with a green and
a yellow LED. These LEDs indicate the following status information:
Table 9- 46
LED
Link port
Activity
port
416
X150 P1 and X150 P2 PROFINET
Pin Signal name
1 RXP
2 RXN
3 TXP
4 Reserved, do not use
5 Reserved, do not use
6 TXN
7 Reserved, do not use
8 Reserved, do not use
LED states at the X150 P1/P2 PROFINET interface
Color State Description
- Off Missing or faulty link
Green Steady light 10 or 100 Mbit link available
- Off No activity
Yellow Flashing Data is being received or sent at port x
light
Technical data
Receive data +
Receive data -
Transmit data +
Transmit data -
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A