Connection To The Foundation - Siemens SINAMICS S120 Manual
Cabinet modules liquid cooled
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
3.3.5.3
Connection to the foundation
Preparatory steps
● If possible, allow unimpeded access to the holes at the bottom of the cabinet units by
removing the protective covers when carrying out installation work.
Connection to the foundation
Four holes for M12 screws are provided on each cabinet panel to secure the cabinet to the
foundation. The fixing dimensions are specified on the associated dimension drawings.
Every cabinet panel must be attached to the ground using at least two opposing attachment
points (one screw each in the front and rear part of the cabinet panel).
If this is not possible for reasons of accessibility, then the attachment points of the adjacent
cabinet panels must be correspondingly raised.
Generally, as many attachment points as possible should be used.
Note
Additional information
Further dimensions can be found in the relevant dimension drawings on the customer DVD
supplied with the device.
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
Mechanical installation
3.3 Installing
65
Advertisement
Table of Contents
