12 SERVICE WORK ON THE CHASSIS
12.39
12.40
82
Checking swingarm
L03161-10
Checking the throttle cable routing
A00753-10
–
Check link fork for damage, cracking, and deformation.
»
If the link fork shows signs of damage, cracking, or defor-
mation:
–
Change the link fork.
Info
Always replace a damaged link fork. Repairing
the link fork is not authorized by KTM.
Preparatory work
–
Remove the seat. (
p. 67)
–
Remove the engine guard. (
–
Remove side cover. (
p. 86)
–
Remove front right fuel tank.
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed side-by-side behind the
handlebars and between the right fork leg and frame toward
the throttle valve body.
»
If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
Finishing work
–
Install the front right fuel tank.
–
Install the engine guard. (
–
Mount side cover. (
p. 87)
–
Mount the seat. (
p. 67)
p. 88)
(
p. 73)
(
p. 75)
p. 89)