Installing The Front Right Fuel Tank; Changing The Fuel Screen - KTM 450 Rally Factory Replica 2021 Owner's Manual

12.31

Installing the front right fuel tank

12.32

Changing the fuel screen

Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
–
Mount the seat. (
Main work
–
Position fuel tank, and mount and tighten screws
Guideline
Screw, front fuel tank M8
–
Mount fuel tank breather hose
A00745-10
–
Remove the wash cap set.
–
Clean quick release coupling
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
A00478-12 lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
–
Position the fuel line in the holder.
Finishing work
–
Install the engine guard. (
–
Mount side cover. (
–
Mount the seat. (
SERVICE WORK ON THE CHASSIS 12
p. 67)
8 Nm (5.9 lbf ft)
2
.
3
thoroughly with compressed
p. 166)
3
.
p. 89)
p. 87)
p. 67)
1
.
75