11 TUNING THE CHASSIS
11.14
52
402496-10
Handlebar position
F02396-10
–
1
Take off protection caps
–
2
Turn adjusting screws
Info
2
Adjusting screws
the fork legs.
Make the same adjustment on both fork legs.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Rebound damping
Standard
Info
Turn clockwise to increase the damping; turn counter-
clockwise to reduce damping when the shock absorber
rebounds.
–
1
Mount protection caps
The holes on the handlebar holders are placed at a distance of
from the center.
3.5 mm (0.138 in)
A
Distance
between holes
The handlebar supports can be turned by 180°. In this way, the
handlebar can be mounted in the position that is most comfortable
for the rider.
The handlebar supports can also be mounted at two different
heights (with and without a spacer).
.
clockwise all the way.
are located at the bottom end of
15 clicks
.
A