Table of Contents
Advertisement
11.37
Checking the frame
11.38
Checking the swingarm
11.39
Checking the throttle cable routing
Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
V00861-01
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for cracks and deformation.
»
If the frame exhibits cracks or deformation due to a
mechanical impact:
–
Change the frame.
V00858-01
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or defor-
mation:
–
Change the swingarm.
V00857-01
Preparatory work
–
Remove the seat. (
–
Turn the tap handle of the fuel tap to the OFF position.
–
Remove the fuel tank.
SERVICE WORK ON THE CHASSIS 11
M6
Info
Always replace a frame that has been dam-
aged due to a mechanical impact. Repair of the
frame is not authorized by KTM.
Info
Always change a damaged swingarm. Repair of
the swingarm is not authorized by KTM.
p. 53)
(
p. 58)
10 Nm
(7.4 lbf ft)
p. 44)
65
Advertisement
Table of Contents
