15 ELECTRICAL SYSTEM
15.1
15.2
108
Removing the 12-V battery
Warning
Risk of injury 12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of 12 V batteries with less than the minimum voltage correctly.
A00747-10
A00748-10
Installing the 12-V battery
A00748-11
1 m (3 ft)
9 V
Preparatory work
–
Remove the seat. (
p. 67)
Main work
–
1
Pull fuel vapor valve
off the holder and hang it to the side.
–
Disconnect negative cable
–
Disconnect positive cable
–
4
Remove screws
.
–
5
Detach holder
to the rear.
–
Lift out the 12-V battery.
Main work
–
Insert the 12-V battery into the battery compartment.
Lithium-ion battery (
–
1
Attach holder
.
–
Mount and tighten screws
–
3
Connect positive cable
Guideline
Nut, cable on 12‑V
battery
–
4
Connect negative cable
2
from the 12-V battery.
3
from the 12-V battery.
p. 139)
2
.
to the 12-V battery.
M6
5 Nm (3.7 lbf ft)
to the 12-V battery.