Table of Contents
Advertisement
13 BRAKE SYSTEM
13.1
13.2
90
Adjusting the basic position of the hand brake lever
F02411-10
Checking brake discs
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized KTM workshop will
be glad to help.)
400257-10
–
Adjust basic position of the hand brake lever to your hand size
by turning adjusting screw
Info
Turn the adjusting screw clockwise to increase the
distance between the hand brake lever and the han-
dlebar.
Turn the adjusting screw counterclockwise to decrease
the distance between the hand brake lever and the han-
dlebar.
The range of adjustment is limited.
Only turn the adjusting screw by hand, and do not use
force.
Do not make any adjustments while riding.
–
Check front and rear brake disc thickness at multiple points
A
for the dimension
.
Info
Wear reduces the thickness of the brake disc around
the contact surface of the brake linings.
Brake discs - wear limit
front
rear
»
If the brake disc thickness is less than the specified value:
–
Change brake disc.
–
Check front and rear brake discs for damage, cracking, and
deformation.
»
If the brake disc exhibits damage, cracking, or deforma-
tion:
–
Change brake disc.
1
.
3.6 mm (0.142 in)
3.5 mm (0.138 in)
Hide quick links:
Advertisement
Table of Contents
